[FREE NEW UPDATED QUESTIONS] Same Microsoft 70-417 Practice Tests Questions From Microsoft Centre 100% Pass! (301-310)

70-417 Exam Dumps Free Shared By Braindump2go For Instant Download Now! Download Latest 70-417 Exam Questions and pass 70-417 one time easily! Do you want to be a winner?

Vendor: Microsoft
Exam Code: 70-417
Exam Name: Upgrading Your Skills to MCSA Windows Server 2012 R2 Exam

292222223222

QUESTION 301
Hotspot Question
You have two servers that run Windows Server 2012 R2.
The servers are configured as shown in the following table.

wps695E.tmp_thumb

You need to ensure that Server2 can be managed by using Server Manager from Server1.
In the table below, identify which actions must be performed on Server1 and Server2.Make only one selection in each row. Each correct selection is worth one point.

wps83B2.tmp_thumb

Answer:

wps98B9.tmp_thumb

Explanation:
http://technet.microsoft.com/library/hh831453.aspx

QUESTION 302
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. All servers runs Windows Server 2012 R2.The domain contains two domain controllers named DC1 and DC2.
Both domain controllers are virtual machines on a Hyper-V host.
You plan to create a cloned domain controller named DC3 from an image of DC1.
You need to ensure that you can clone DC1.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

A.    Add the computer account of DC1 to the Cloneable Domain Controllers group.
B.    Create a DCCIoneConfig.xml file on DC1.
C.    Add the computer account of DC3 to the Cloneable Domain Controllers group.
D.    Run the Enable-AdOptionalFeaturecmdlet.
E.    Modify the contents of the DefaultDCCIoneAllowList.xml file on DC1.

Answer: AB
Explanation:
* Cloneable Domain Controllers Group (located in the Users container). Membership in this group dictates whether a DC can or cannot be cloned. This group has some permissions set on the domain head that should not be removed. Removing these permissions will cause cloning to fail. Also, as a best practice, DCs shouldn’t be added to the group until you plan to clone and DCs should be removed from the group once cloning is complete. Cloned DCs will also end up in the Cloneable Domain Controllers group.
* DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more.

QUESTION 303
Your network contains an Active Directory domain named contoso.com.
The domain contains a domain controller named DC1 that runs Windows Server 2012 R2.
DC1 has the DHCP Server server role installed.
DHCP is configured as shown in the exhibit. (Click the Exhibit button.)

wpsBFCA.tmp_thumb

You discover that client computers cannot obtain IPv4 addresses from DC1.
You need to ensure that the client computers can obtain IPv4 addresses from DC1.
What should you do?

A.    Disable the Deny filters.
B.    Authorize DC1.
C.    Activate the scope.
D.    Disable the Allow filters.

Answer: D
Explanation:
There is no items in the deny List. So it means that client computers MAC addresses is not listed in the allow list. So we have to disable the “Allow Filters”
http://technet.microsoft.com/en-us/library/ee956897(v=ws.10).aspx

wpsD925.tmp_thumb

QUESTION 304
You have a failover cluster named Cluster1 that contains four nodes.
All of the nodes run Windows Server 2012 R2.
You need to schedule the installation of Windows updates on the cluster nodes.
Which tool should you use?

A.    The Add-CauClusterRolecmdlet
B.    TheWuauclt command
C.    TheWusa command
D.    The Invoke-CauScancmdlet

Answer: D
Explanation:
The Invoke-CauScancmdlet performs a scan of cluster nodes for applicable updates and returns a list of the initial set of updates that would be applied to each node in a specified cluster.
http://technet.microsoft.com/en-us/library/hh847235(v=wps.620).aspx
http://technet.microsoft.com/en-us/library/cc720477(v=ws.10).aspx
http://support.microsoft.com/kb/934307
http://technet.microsoft.com/en-us/library/hh847228(v=wps.620).aspx

QUESTION 305
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012 R2. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludcdApplicationList and receive the output shown in the following table.

wpsFB94.tmp_thumb[3]

You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

wps32CA.tmp_thumb

A.    Option A
B.    Option B
C.    Option C
D.    Option D
E.    Option E

Answer: AE
Explanation:
Because domain controllers provide a distributed environment, you could not safely clone an Active Directory domain controller in the past.
Before, if you cloned any server, the server would end up with the same domain or forest, which is unsupported with the same domain or forest. You would then have to run sysprep, which would remove the unique security information before cloning and then promote a domain controller manually. When you clone a domain controller, you perform safe cloning, which a cloned domain controller automatically runs a subset of the sysprep process and promotes the server to a domain controller automatically.
The four primary steps to deploy a cloned virtualized domain controller are as follows:
Grant the source virtualized domain controller the permission to be cloned by adding the source virtualized domain controller to the Cloneable Domain Controllers group.
Run Get-ADDCCloningExcludedApplicationListcmdlet in Windows PowerShell to determine which services and applications on the domain controller are not compatible with the cloning.
Run New-ADDCCloneConfigFile to create the clone configuration file, which is stored in the C:\Windows\NTDS.
In Hyper-V, export and then import the virtual machine of the source domain controller.
Run Get-ADDCCloningExcludedApplicationListcmdlet In this procedure, run the Get- ADDCCloningExcludedApplicationListcmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationListcmdlet before the New- ADDCCloneConfigFilecmdlet because if the New-ADDCCloneConfigFilecmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList
Get-ADDCCloningExcludedApplicationList -GenerateXml
The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
The Get-ADDCCloningExcludedApplicationListcmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
The Get-ADDCCloningExcludedApplicationListcmdlet needs to be run before the New- ADDCCloneConfigFilecmdlet is used because if the New-ADDCCloneConfigFilecmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfigcmdlet in PowerShell
By hand with an XML editor
By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)

wps5C4B.tmp_thumb

wps7336.tmp_thumb

wps9364.tmp_thumb

You can populate the XML file. . . . . doesn’t need to be empty. . . . .

wpsB90D.tmp_thumb

wpsCD1B.tmp_thumb

http://technet.microsoft.com/en-us/library/hh831734.aspx
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directory-domain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx

QUESTION 306
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server2 that runs Windows Server 2012 R2.
You are a member of the local Administrators group on Server2.
You install an Active Directory Rights Management Services (AD RMS) root cluster on Server2.
You need to ensure that the AD RMS cluster is discoverable automatically by the AD RMS client computers and the users in contoso.com.
Which additional configuration settings should you configure? To answer, select the appropriate tab in the answer area.

wps480.tmp_thumb

Answer:

wps1ED5.tmp_thumb

QUESTION 307
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 runs Windows Server 2012 R2.
You enable the EventLog-Application event trace session.
You need to set the maximum size of the log file used by the trace session to 10 MB.
From which tab should you perform the configuration? To answer, select the appropriate tab in the answer area.

wps3BE7.tmp_thumb

Answer:

wps5503.tmp_thumb

QUESTION 308
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server 1. All servers run Windows Server 2012 R2.
You need to collect the error events from all of the servers on Server1. The solution must ensure that when new servers are added to the domain, their error events are collected automatically on Server1.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

A.    On Server1, create a collector initiated subscription.
B.    On Server1, create a source computer initiated subscription.
C.    From a Group Policy object (GPO), configure the Configure target Subscription Manager setting.
D.    From a Group Policy object (GPO), configure the Configure forwarder resource usage setting.

Answer: BC
Explanation:
To set up a Source-Initiated Subscription with Windows Server 2003/2008 so that events of interest from the Security event log of several domain controllers can be forwarded to an administrative workstation
* Group Policy
The forwarding computer needs to be configured with the address of the server to which the events are forwarded. This can be done with the following group policy setting:
Computer configuration-Administrative templates-Windows components-Event forwarding- Configure the server address, refresh interval, and issue certificate authority of a target subscription manager.
* Edit the GPO and browse to Computer Configuration | Policies | Administrative Templates | Windows Components | Event Forwarding – Configure the server address, refresh interval, and issuer certificate authority of a target Subscription Manager

QUESTION 309
Hotspot Question
Your network contains a RADIUS server named Admin1.
You install a new server named Server2 that runs Windows Server 2012 R2 and has Network Policy Server (NPS) installed.
You need to ensure that all accounting requests for Server2 are forwarded to Admin1.
On Server2, you create a new remote RADIUS server group named Group1 that contains Admin1.
What should you configure next on Server2? To answer, select the appropriate node in the answer area.

wps7A01.tmp_thumb

Answer:

wps92FE.tmp_thumb

QUESTION 310
Your network contains an Active Directory domain named adatum.com.
A network administrator creates a Group Policy central store.
After the central store is created, you discover that when you create new Group Policy objects (GPOs), the GPOs do not contain any Administrative Templates.
You need to ensure that the Administrative Templates appear in new GPOs.
What should you do?

A.    Add your user account to the Group Policy Creator Owners group.
B.    Configure all domain controllers as global catalog servers.
C.    Copy files from %Windir%\Policydefinitions to the central store.
D.    Modify the Delegation settings of the new GPOs.

Answer: C
Explanation:
To take advantage of the benefits of .admx files, you must create a Central Store in the SYSVOL folder on a domain controller. The Central Store is a file location that is checked by the Group Policy tools. The Group Policy tools use any .admx files that are in the Central Store. The files that are in the Central Store are later replicated to all domain controllers in the domain.


Braindump2go New Updated 70-417 Exa Dumps are Complete Microsoft 70-417 Course Coverage! 100% Real Questions and Correct Answers Guaranteed! Updated 70-417 Preparation Material with Questions and Answers PDF Instant Download:

2922222243222

http://www.braindump2go.com/70-417.html

Comments are closed.